Tuesday, March 29, 2011

Moving Forward

New City Design is making progress!

As the beginning of the year comes to a close, New City Design is making plans to move forward into plans for an official business. We are currently being incubated by The Sun Ministries Opportunity Center, with high hopes of being independently established and located in the Hyde Park neighborhood of St. Louis, Missouri. The goal is to establish MWBE status within the next year, opening up all sorts of opportunities for business!

If you are interested in helping to further our progress, please let me know! You can help by hiring us for your interior design consultation, ordering a custom piece of home decor from us, or buying your next custom gift from us!

Stay tuned for more updates and goodies from New City Design!

Wednesday, March 9, 2011

Make your own leggings!

A while ago, I decides to try my hand at refashioning some clothing into things I would wear more often. My first project was to take a pair of flaired dress pants and make them into leggings. The pants I used were New York and Company black stretch. I picked these because they were a bit thicker than most leggings, and they would be warmer, whether I was wearing them as pants with a long shirt, or under a pair of jeans in place of thermals. They looked like this before I began:

(photo credit, Google)

The first thing I did was to lay the pant legs flat out on a table, pulling the outside seam taut and flat. It is okay if the inseam is a little bunched up. You will only be altering the outside seam.

Next, measure from outside of the knee of the pantleg about 3/4 inch. This is where the taper will start.

Mark 3/4 inch measurement with pin. Gradually taper/pin your measurements to form the pantleg. This might take some adjustments, so keep trying until you have a proper increase toward the hem. This requires a bit of precision. You might even want to measure your calf to determine the width of the finished pantleg. Be patient, or you will end up with a really funky pair of pants.

Next, cut along the outside of the pins. Make sure to cut the fabric and keep it in one piece. When you have trimmed the pantleg down, it will look like this:

Next, take the piece of fabric that you trimmed off of the first pantleg, and line it up along the taut, flat edge of the second pantleg.
Using the excess fabric as a template, pin and trim just as before.

When both sides are pinned, sew along the INSIDE of the row of pins, gradually tapering the pantleg.

Remove pins, trim down the seam to about 1/2 inch, and turn pants right side out. Viola! Refashioned leggings!